Tilt and Rotate Safely

Worker safety is priority number one, especially in a shop full of heavy industrial equipment. Our line of powered manipulators allows workers to tilt, rotate, flip or otherwise position a workpiece into any position safely with just a push of a button.

manipulators

Application Examples


Ergonomics Optimized

With the push of a button, you can raise, lower, tilt or rotate your weldment to a comfortable working height without the hassles of an overhead crane or forklift

ergonomics

Increase Productivity

Spend more time welding with our tilt and rotate positioner and less time trying to manually maneuver your weldments into various positions for weld out

increase_1

Improve quality

With the push of a button, you can raise, lower, tilt or rotate your weldment to a comfortable working height without the hassles of an overhead crane or forklift

improve

Eliminate Worker Fatigue

Welders no longer have to use brute force to flip heavy parts to reach all the welds.  These manipulators can move weldments into the next position in just seconds.

eliminate_fatigue

Built to Perform

There is nothing to worry about if you tilt a heavy part 90° or more for welding.  The tilt-torque rating is even stronger when returning the manipulator to home position (0°) eliminating the possibility of failure because a part is too heavy.

built

Tech Specs


tech2Your part can be completely flipped upside down with a full tilting range from 0°- 180°

Full Rotation

The table top can rotate infinitely in both directions with a variable speed control for optimal welding

rotation

Height Adjustable

Position your part low or high and/or tilt your part 0° – 180° all while being able to rotate 360°

adjustable

 

 

Total Control

Each manipulator comes equipped with a push button control pendent along with a foot pedal for hands free rotational control.

pad  

 

1.Emergency Stop

2.Controller On

3.Height Adjustment (up and down)

4.Enabling Button

5.Variable Speed Control

6.Tilting (forward and back)

7.Rotation (left and right)

controller

 

m2000 m2000
Features M2000 M4000
Load Capacity 2 Tons (4,400 lbs) 4 Tons (8,800 lbs)
Table Rotation Range 360° 360°
Variable Speed Range 0 – 2 rpm 0 – 2 rpm
Table Tilting Range 0° – 180° 0° – 180°
Power Requirements 480V 3-Phase 480V 3-Phase
Vertical Axis Drive Hydraulic Hydraulic
Tilting Axis Drive Hydraulic Hydraulic
Rotations Axis Drive Motor Motor
Welding Ground Hookup Built in Built in
drawing m2000 m2000
Features M2000 M4000
A: Min Height at 0° Tilt 475 mm (19”) 680 mm (27”)
B: Max Height at 180° Tilt 900 mm (35”) 900 mm (35”)
C: Max Height at 0° Tilt 1350 mm (53”) 1850 mm (72”)
D: Interference Ø at 180° Tilt 1000 mm (39”) 1650 mm (65”)
MD: Torque 2500 Nm (1840 ft lbs) 5000 Nm (3680 ft lbs)
MK: Tilting Torque 8000 Nm (5900 ft lbs) 32,000 Nm (23,600 ft lbs)